Important Notice for iMetrik 3G and 3.5G Customers in the USA More info

  • Battery Operated
  • Up to 5 years battery life
  • Tamper sensor (coming soon)
  • Support 2G GPRS/3G/4G LTE
  • 24 hour Heartbeat
  • Repo Mode
  • Whether Proof

Contact us    Our products

← Back to products

5 Years Standby GPS tracking device can track your vehicle or asset by GNSS(Global navigation satellite system).

Support 2G GPRS/3G/4G LTE cellular network.

Designed for tracking assets, containers, trailers, skip bins, and other assets where super long battery life is required without sacrificing the frequency of updates and performanceWith an incredible battery life of up to 5 years once daily updates, the V410B can be attached to assets and tracked without needing to change batteries.

The tamper sensors give the customer an added checkpoint on the integrity of their equipment. The tamper sensor is activated when the GPS tracker is removed. When removed, a message is sent to our server. If the optional alert is enabled, a message is sent to the customer.

  • Support GSM/SMS/EGPRS/WCEMA/LTE FDD/LTE TDD (2G, 3G, 4G M2M-optimized network)
  • Smart and easy to hide for installation
  • Built-in light sensor, if device is removed and there is light in, it will trigger a remove alarm
  • Long Standby mode, device wake up once per day then sleep. It can stand up to 5 years (Power on once per day)
  • Built-in 6500mAh zero self-discharge lithium manganese disposable battery
  • Low battery alarm notification is sent when device’s battery power falls below a certain value
  • Smart emergency mode, device will start real-time tracking and upload data through 2G/3G/4G regularly
  • OTA (Over the Air) The firmware can be upgraded remotely
  • GEO-fence Alert notification when the vehicle entry/exit/across the GEO-fence.

Contact us for more info

Specifications

Dimension 120(L) x 69(W) x 19.5(H)mm, 4.75" X 2.75" X 0.75" Inches
Color Black
Switch 1 For Power on/off
Battery 6500 mAh Lithium manganese Battery
Weight 150g
Voltage 3.0 VDC
Working Mode Standby (Working 2 minutes per day, sleep in other time). Emergence (Real-time tracking for user-define time after waking up)
Working Current LTE/WCDMA data (700mA); GPRS data (500mA); 15uA(power off)
Sleep Current 15uA
Working Temperature -20℃~65℃
Working Humidity 20%~80%RH
GNSS Accuracy 5-15m
GPS Band 1575MHz
GSM Band B2 / B3 / B5 / B8
WCDMA Band B1 / B2 / B5 / B8
EGPRS Band 850 / 900 / 1800 / 1900MHz
LTE FDD Band B1 / B2 / B3 / B4 / B5 / B8 / B28
LTE TDD Band B40
Antenna Built-in GSM / WCDMA / LTE-FDD / LTE-TDD antenna, Ceramics GPS antenna
Module Certificat GCF, CE, PTCRB, RCM, FCC, IC, JATE, Anatel, FAC, CCC etc
GNSS Band 1575MHz
GNSS Accuracy <2M @ Open Sky
LBS Accuracy >200m (Depend Density of Base Stations)
Hot / warm / cold fix time <3s,<15s,<60s

v410B Features

Feature Included

GPS locating and tracking

With one click you can open a map to see exactly where your device is and where it's been.
If the vehicle is in movement, you will be able to follow it live on the map. If it is stopped, the address of its location is displayed and for how long.
You have the option of using the Map View or Satellite view to monitor your device. You also have access to the Google street view feature.

Yes

History Playback

Our platform will store history for up to 90 days. You can easily search by date to see the full activity of your device.

Our system records all device movements and addresses where the device has stopped for more then a 5 minute period.

The history playback feature is designed to show you a visual playback of where their device has traveled throughout the day.

No

Top Stop Report

Produce a report where the car stops at most frequently in a given time period. It can be the top 1, 3, 5 or 10 most stop locations. You can also download a full report on a PDF. Very useful for repossession when a device may have been tampered with.

No

Asset Mapping

Get an instant overview of the individual locations of all assets in your entire fleet. With one click, enjoy online visibility of the last location recorded for each and every vehicle. Zoom in or out. Set a GEO fence or speed alerts for your entire fleet in seconds.

Yes

GEO Fencing Alerts

Geofencing allows you to be notified if a device enters or exits an area. This can be as small as a parking lot, or as big as a country.
A geofence will alert you with the exact time your device enters or leaves a designated area. You draw the perimeter with your mouse directly on the map. Round, square or polygon shape. You may set a GEO Fence for a single asset, or your entire fleet and will be synchronized automatically when a device is installed.

Yes

24 Months Warranty

All of our products are warranted against manufacturing defects for a period of 24 months. The warranty period begins on the date of installation, not on the purchase date.
View complete warranty

Yes

Power Saver Management

Constantly monitors the power level of the device. Should a device experience a power loss due to tampering, a locate is performed and an alert message is sent by SMS and/or email.

No

Continuous Network Connectivity Monitoring

Clearly displays which vehicle is connected to the network and its location, continuously. Should for whatever reason we lose connectivity to a device, a colour code SIM Status will be updated. You can also set a message notification in your settings.

No

Speed Alert Notification

Speed alerts are the perfect way to monitor how your vehicle or asset is being driven. Setting a speed limit ensures that if your vehicle goes above a certain speed, you're going to know about it.

What better way to find out if your vehicle is being abused or driven in an irresponsible way. You set your own speed limit. It can be set for a single vehicle or your entire fleet.

No

Onboard Back-up Battery

Should, for some reason the device not get power, the internal automotive grade battery will provide hours of service.

No

Power Loss Alert

Constantly monitors the power level of the device. Should a device experience a power loss due to tampering, a locate is performed and an alert message is sent.

No

Bi-Daily Heartbeat

The system will automatically "PING" or take a presence of your assets every 12 hours. This process is to make sure the device is still reporting while it is in power saver mode. The system will then update its network Presence Indicator accordingly. Very useful if ever the device was tempered with or driven out of cellular coverage area or underground..

No

Starter Interrupter

One click of a mouse is all it takes to prevent the vehicle from starting. Live or scheduled at a future time. This lowers repossession costs and can also help prevent vehicle theft and / or unauthorized use.

No

Payment Reminder Buzzer

Our technology is designed to help you collect your money. With its internal buzzer, a friendly audible payment reminder can be sent to the driver. When the car is started and moving, the buzzer will sound for a few seconds - on demand or with a pre-set schedule.

No

Low Battery Alert

Prompts an alert if the device battery is below its effective power capacity.

Yes

QUICK Connect OBD Cable

The tracking module will also install quickly using our optional Quick Connect OBD II connector. This allows the user to connect the module using a pass-through cable to the OBDII port for power and ground.

No

Our products

Partager